Impedance studies on plasticized PMMA-LiX [X: CF3SO3, N(CF3SO2)2−] polymer electrolytes

Plasticized polymer electrolytes composed of poly(methylmethacrylate) (PMMA) as the host, propylene carbonate (PC) or ethylene carbonate (EC) as a plasticizer and LiX (X: CF₃SO₃⁻ or N(CF₃SO₂)₂⁻) as a salt were prepared by the solution cast technique. Impedance spectroscopy was performed in the temperature range between 303 and 383 K. In this paper, we report the electrical properties of polymer electrolytes with different lithium salts and plasticizers. The polymer electrolytes investigated exhibited high ionic conductivity at room temperature in the range of 10^− 6 to 10^− 4 S cm^− 1. The temperature dependence studies showed that the samples were ionic conductors and seemed to obey the Vogel-Tamman-Fulcher (VTF) rule. FTIR spectroscopy studies confirmed the polymer-salt interaction.     

Genetic Algorithm for the Multiple-Query Optimization Problem

Producing answers to a set of queries with common tasks efficiently is known as the multiple-query optimization (MQO) problem. Each query can have several alternative evaluation plans, each with a different set of tasks. Therefore, the goal of MQO is to choose the right set of plans for queries which minimizes the total execution time by performing common tasks only once. Since MQO is an NP-hard problem, several, mostly heuristics based, solutions have been proposed for solving it. To the best of our knowledge, this correspondence is the first attempt to solve MQO using an evolutionary technique, genetic algorithms     

Transparent conducting indium oxide thin films grown by low-temperature metal organic chemical vapor deposition

We have grown indium oxide thin films on silicon substrates at low temperature by metal organic chemical vapor deposition. Polycrystalline film growth could only be obtained at temperatures below 400 °C. Above 400 °C, metallic indium deposition dominated. We have investigated the effect of substrate temperature and reactor pressure on the film growth and structural properties in the range of 250-350 °C and 5 ^? 10³-4 ^? 10⁴ Pa. The film grown at 300 °C exhibited a resistivity of about 3.6 × 10^− 3 Ω cm and a maximal optical transmittance of more than 95% in the visible range. The film showed an optical band gap of about 3.6 eV.     

A Coordinated Framework of DG Allocation and Operating Strategy in Distribution System for Configuration Management under Varying Loading Patterns

Abstract

The distributed generation (DG) planning with the varying pattern of the practical load is difficult as it calls for the frequent changes in DG size and system configuration, which is neither feasible nor permissible. Rather such a DG size and a configuration, which can be utilized over a wider load pattern, are more acceptable. This work presents a coordinated approach for DG planning and system reconfiguration. While to operate a particular DG size and the system configuration over a wide range of loading pattern, the configurations are ranked under different probabilistic loading patterns. Based upon the ranking of the new configuration, the energy performance of the coordinated planning is evaluated. Further, the observations from coordinated planning are imposed on coordinated operation using harmony search algorithm (HSA). The proposed approach is tested for single as well as multi-objectives on a 33-node system. A significant improvement in the computational efforts and energy performance of the resulting configuration have been observed where losses have reduced to 81.11 and 53.77?kW with single DG and multi-DG allocation respectively.     

Design of Unskewed Interior Permanent Magnet Traction Motor with Asymmetric Flux Barriers and Shifted Magnets for Electric Vehicles

Abstract

Interior permanent magnet synchronous motors (IPMSMs) are commonly used in electric and hybrid electric vehicles. Nissan Leaf electric vehicle (EV) uses skewed-rotor IPMSM as a traction motor. This motor is considered as a benchmark in this work. Although, skewing improves the torque quality of the motor by reducing the torque ripple, it reduces the average torque and increases the motor manufacturing complexity and cost. This article proposes improvements to the benchmark motor torque quality without skewing. The proposed motor uses the same stator winding and rotor magnet topologies of the benchmark motor with the same geometric constraints and magnet volume. Modifications are applied to the placement of the magnets in the rotor and the shape of the flux barriers to achieve the performance requirements. The design procedure of the proposed unskewed design is illustrated. Moreover, the electromagnetic performance of the proposed design is investigated. The design shows competitive performance in terms of the average torque, torque ripple, cogging torque, and efficiency compared to the benchmark motor. The mechanical integrity of the design is also verified. The proposed design is found to be a suitable alternative to the benchmark traction motor with a reduced rotor weight and without skewing.     

Observation of coupling between zero- and two-dimensional semiconductor systems based on anomalous diamagnetic effects

We report the direct observation of coupling between a single self-assembled InAs quantum dot and a wetting layer, based on strong diamagnetic shifts of many-body exciton states using magneto-photoluminescence spectroscopy. An extremely large positive diamagnetic coefficient is observed when an electron in the wetting layer combines with a hole in the quantum dot; the coefficient is nearly one order of magnitude larger than that of the exciton states confined in the quantum dots. Recombination of electrons with holes in a quantum dot of the coupled system leads to an unusual negative diamagnetic effect, which is five times stronger than that in a pure quantum dot system. This effect can be attributed to the expansion of the wavefunction of remaining electrons in the wetting layer or the spread of electrons in the excited states of the quantum dot to the wetting layer after recombination. In this case, the wavefunction extent of the final states in the quantum dot plane is much larger than that of the initial states because of the absence of holes in the quantum dot to attract electrons. The properties of emitted photons that depend on the large electron wavefunction extents in the wetting layer indicate that the coupling occurs between systems of different dimensionality, which is also verified from the results obtained by applying a magnetic field in different configurations. This study paves a new way to observe hybrid states with zero- and two-dimensional structures, which could be useful for investigating the Kondo physics and implementing spin-based solid-state quantum information processing.

Open image in new window

     

Study on novel poly (vinyl pyrrolidone) doped MWCNTs/polyrhodanine nanocomposites: Synthesis,characterization, and thermal performance

In this paper, poly (vinyl pyrrolidone) (PVP) doped multiwall carbon nanotubes (MWCNTs/polyrhodanine), were synthesized through one-step chemical oxidative polymerization of rhodanine monomers on the surface-modified carbon nanotubes. Characterization of MWCNTs/polyrhodanine was conducted by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transforms infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and EDX spectrum analyses in which the results confirmed the successful formation of MWCNTs/polyrhodanine. In addition, to investigate the thermal properties of samples, thermogravimetric analysis (TGA) was employed, and results exhibited significant improvement in the nanocomposite thermal stability due to the addition of MWCNTs with reinforcement effect in polymer matrix.     

The Random <Emphasis Type="Italic">J</Emphasis>-Model with Biquadratic Interaction

The spin-1 model is studied on the Bethe lattice by including the bilinear J and biquadratic K exchange interactions into the Hamiltonian. The effects of J is randomized by using a bimodal random distribution with an adjustable parameter α which allows to study the cases of ±J-model and bond-dilution. The thermal variations of the order-parameters are studied to obtain the possible phase diagrams of the model. It is found that second-order phase transitions lines separate the ordered-phases, ferromagnetic, or antiferromagnetic, from the disordered one, i.e., the paramagnetic phase. The staggered quadrupolar phase lines are also found and only seen for higher negative K values for coordination number q=4 and 6, only. The reentrant behavior is also found for some of the phase transitions lines.     

Tuning of Dielectric Parameters of (NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/CuTl-1223 Nano-superconductor Composites by Temperature and Frequency

Nickel ferrite (NiFe₂O₄) nanoparticles and Cu_0.5Tl_0.5Ba₂Ca₂Cu₃O_10?δ (CuTl-1223) superconductor were prepared separately and then mixed in an appropriate ratios at the final stage to obtain (NiFe₂O₄) _x /CuTl-1223 (x = 0, 0.5, and 1.0 wt%) nano-superconductor composites. There was no significant change observed in crystal structure of the host CuTl-1223 superconducting matrix after the addition of NiFe₂O₄ nanoparticles. The value of zero-resistivity critical temperature { T _{c(R = 0)} (K)} was decreased with increasing content of these nanoparticles in these composites. Maximum values of dielectric loss tangent (tanδ) at lowest possible frequency of 40 Hz were increased with the increase of operating temperature, while its values were decreased and become almost zero at higher frequencies for all these samples at all operating temperatures. A peak in dielectric loss tangent was shifted towards lower frequency values with the addition of these nanoparticles in CuTl-1223 superconducting matrix. The dielectric loss tangent peak was also shifted towards lower frequency values in all these samples with increasing operating temperature, which shows the relaxator-like behavior in these samples. The dielectric parameters of these composites can be tuned by frequency, operating temperatures, and nature and content of these nanoparticles.